Actia Pp2000 Keygen Download [BETTER] Crack
LINK ===== https://urluss.com/2tuATA
```
What is ACTIA PP2000 and How to Use It
ACTIA PP2000 is a diagnostic tool for Peugeot and Citroen vehicles from 1995 to 2019. It allows you to perform various functions such as reading and clearing fault codes, testing actuators, programming functions, and more. It works with a special interface called Lexia 3, which connects to your car's OBD port and your computer via USB.
In this article, we will show you how to install and use ACTIA PP2000 software on your Windows PC. You will need the following items:
A Lexia 3 interface with a USB cable and two D-SUB connectors
A Windows PC with an internet connection
A Peugeot or Citroen vehicle with an OBD port
Step 1: Install ACTIA PP2000 Software
The latest version of ACTIA PP2000 software is V7.83, which you can download from this link: http://blog.vxdas.com/lexia-3-pp2000-diagbox-software-v7-83-download/. After downloading the software, unzip it and run the setup.exe file. Follow the instructions on the screen to install the software. You may need to restart your computer after the installation.
Step 2: Connect Lexia 3 Interface to Your Car and PC
Before connecting the Lexia 3 interface to your car and PC, make sure the ignition of your car is off. Then, plug the OBD connector of the Lexia 3 interface to your car's OBD port, which is usually located under the dashboard. Next, connect the USB cable of the Lexia 3 interface to your PC's USB port. You may need to install the driver for the Lexia 3 interface if it is not recognized by your PC automatically.
Step 3: Run ACTIA PP2000 Software and Start Diagnosis
After connecting the Lexia 3 interface to your car and PC, you can run the ACTIA PP2000 software from your desktop or start menu. The software will detect your vehicle model and VIN automatically. You can then select the function you want to perform from the main menu, such as reading fault codes, testing actuators, programming functions, etc. Follow the instructions on the screen to complete the diagnosis.
Note: Some functions may require a code or password to access. You can find these codes or passwords online or contact your dealer for assistance.
Conclusion
ACTIA PP2000 is a powerful diagnostic tool for Peugeot and Citroen vehicles from 1995 to 2019. It can help you troubleshoot and fix various problems with your car's engine, transmission, ABS, airbag, etc. It is easy to install and use with a Lexia 3 interface and a Windows PC. If you have any questions or issues with ACTIA PP2000 software or Lexia 3 interface, please feel free to contact us at any time.
```
```
FAQs
Here are some frequently asked questions and answers about ACTIA PP2000 and Lexia 3 interface:
Q: What is the difference between ACTIA PP2000 and Diagbox
A: ACTIA PP2000 is the original software for Peugeot and Citroen vehicles, while Diagbox is a newer software that combines PP2000 and Lexia 3. Diagbox supports more models and functions than PP2000, but it may also have more bugs and compatibility issues. You can use either software with the Lexia 3 interface, depending on your preference and needs.
Q: What are the system requirements for ACTIA PP2000 software
A: ACTIA PP2000 software works on Windows XP, Windows 7, Windows 8, and Windows 10. However, it is recommended to use Windows XP or Windows 7 32-bit for better performance and stability. You also need at least 4GB of RAM and 10GB of free disk space on your PC.
Q: How to update ACTIA PP2000 software
A: You can update ACTIA PP2000 software by downloading the latest version from the official website or from reliable online sources. However, you should be careful not to update the firmware of the Lexia 3 interface, as it may cause damage or malfunction. You can check the firmware version of your Lexia 3 interface by running Diagbox software and going to \"About\" section.
Q: How to solve the \"unknown USB device\" error when connecting Lexia 3 interface
A: This error may occur due to a faulty USB cable or connector, a wrong driver installation, or a corrupted software. You can try the following solutions to fix this error:
- Replace the USB cable or connector with a new one.
- Uninstall and reinstall the driver for the Lexia 3 interface.
- Modify the Lexia 3 interface to a new one by following this guide: http://blog.eobdtool.co.uk/lexia-3-pp2000-unknown-usb-device-another-solution/
``` ec8f644aee